Clarion iDXZ775USB - Manual (Page 22)

English
20
DXZ775USB
Radio Operations
Listening to the radio
1. Press the [ SRC ] button and select the radio
mode. The frequency appears in the display.
2. Press the [ MENU ] button and select the
radio band. Each time the button is pressed,
the radio reception band changes in the
following order:
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...
3. Push the [ SEEK PANEL ] leftward or
rightward to tune in the desired station.
Tuning
There are 3 types of tuning mode available,
seek tuning, manual tuning and preset tuning.
Seek tuning
1. Press the [ MENU ] button and select the
desired band (FM or AM).
2. Tune into a station.
∗
If “ MANU ” is lit in the display, press and hold
the [ MENU ] button for 1 second or longer.
“ MANU ” in the display goes off and seek
tuning is now available.
When the [ SEEK PANEL ] is pushed rightward,
the station is sought in the direction of higher
frequencies; if the [
SEEK PANEL ] is pushed
leftward, the station is sought in the direction of
lower frequencies.
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the
frequency changes one step at a time. In the
quick tuning mode, you can quickly tune the
desired frequency.
1. Press the [ MENU ] button and select the
desired band (FM or AM).
∗ If “ MANU ” is not lit in the display, press and
hold the [ MENU ] button for 1 second or
longer. “ MANU ” is lit in the display and manual
tuning is now available.
2. Tune into a station.
● Quick tuning
Push the [ SEEK PANEL ] leftward or rightward
and hold in position for 1 second or longer to
tune in a station.
● Step tuning
Push the [ SEEK PANEL ] leftward or rightward
to manually tune in a station.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio
stations in memory. Pushing the [
P.CH ] button
upward or downward recalls the stored radio
frequency automatically.
1. Press the [ MENU ] button and select the
desired band (FM or AM).
2. Push the [ P.CH ] button upward or downward
to recall the stored station.
Manual memory
1. Select the desired station with seek tuning or
manual tuning.
2. Press the [ ] button to enter the
preset memory mode.
3. Push the [ P.CH ] button upward or downward
to select a desired station, then press and
hold the [
] button for 2 seconds or
longer to store the current station into preset
memory.
DXZ775USB_EN.book 20 ページ ２００６年１２月２５日 月曜日 午前１１時３７分