Mode functions – Cobra Electronics CXT450 User Manual

Page 7

Advertising
background image

Customer Assistance

Warranty

Introduction

9

Operation

8

Mode Functions

Operation

Set CTCSS Privacy Codes

To select a CTCSS privacy code:
1.
After selecting a channel, press

the Mode/Lock button until the small
numbers next to the channel number
flash on the display.

If DCS is turned on at the channel
selected, the display will flash the
CTCSS icon and “OFF.” To switch from
DCS to CTCSS, press the Channel Up
or Channel Down button while the
display is flashing “OFF.” The display
will then show the small numbers
flashing and you will then be able
to proceed to step 2.

2. Press using the Channel Up or Channel Down button to select

a privacy code. You can hold the Up or Down button for fast advance.

3. When your desired CTCSS privacy code is displayed, choose one

of the following:

a. Press the Mode/Lock button to enter the new setting and

proceed to other functions.

b. Press the Enter/Hi•Low button to enter the new setting and

return to Standby mode.

c. Do not press any buttons for 15 seconds to enter the new

setting and return to Standby mode.

Scrolling through Mode Functions

By scrolling through the Mode Functions, you will be able to
select or turn on/off preferred features of your microTALK radio.
When scrolling through the Mode Functions, your radio features
will be displayed in the following order:

Set CTCSS Privacy Codes
Set DCS Privacy Codes
Set NOAA All Hazards Radio Channel
Set VOX On/Off
Set VOX Sensitivity Level
Set Memory Locations
Set Channel Scan
Set CTCSS Privacy Code Scan
Set DCS Privacy Code Scan
Set Memory Location Scan
Set Call Tones
Set Roger Beep On/Off
Set Keystroke Tones On/Off

Scroll through the mode functions using the Mode/Lock button.
Each press and release of the Mode/Lock button will advance to
the next mode function. Press the Talk button at any point to
return the radio to Standby mode.

Privacy Codes

Your microTALK radio incorporates two advanced coded squelch
systems that can help to reduce interference from other users
on any given channel. CTCSS (Continuous Tone Coded Squelch
System) provides 38 privacy codes and DCS (Digitally Coded
Squelch) provides 83 privacy codes. This provides a total of 121
Privacy Codes. Either system can be used on all channels, but both
systems cannot be used on the same channel at the same time.

To successfully communicate using a privacy code, both
the sending and receiving radios must be tuned to the same
channel and to the same privacy code system (CTCSS or
DCS) and privacy code number. Each channel will remember
the last privacy code system and number you select.

The privacy code 00 is not a privacy code, but allows all
signals to be heard on a channel that is set to 00 on both
the CTCSS and DCS systems.

Mode/Lock Button

CTCSS Privacy Code

Channel Buttons

Mode/Lock Button

Advertising