To cancel timer, To check timer during timed function – Bosch HBL 65.. User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
• The indicator word TIMER will remain in the
display during timer countdown.
• The timer will countdown in minutes until the
last minute when it will switch over and count
down in seconds.
• At the end of the timing interval the indicator
word TIMER will blink on and off and three
“beeps” will be heard.
• The display will return to time of day or any
active programmed function and “beeping” will
continue every 10 seconds until any button is
touched.
• Once any button is touched the flashing word
TIMER disappears from the display.
To Cancel Timer
With the indicator word TIMER in the display all
that is necessary to cancel the timer is to depress
the Timer button once.
If some other timed function has been pro
grammed after setting the timer, the TIMER indi
cator word can be recalled to the display by de
pressing the Timer button.
Then with the indicator word TIMER in the dis
play you can, as above, cancel the timer by de
pressing the Timer button a second time.
Then after 5 seconds the display will return to
time of day or any active programmed function.
To Check Timer During Timed Function
If some other timed function has been pro
grammed after setting the timer, TIMER may be
recalled to the display by depressing the Timer
button.
The amount of time remaining on the timer can
then be viewed.
10