CyberPower Systems CPS320SL User Manual

Page 16

Advertising

FCC Notice

This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the
receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help. Any special
accessories needed for compliance must be specified in the instruction.

CAUTION: A shielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby
radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices
to this equipment.

CAUTION: Any changes or modifications not expressly approved by the guarantee of this device could void the user’s authority to operate
the equipment.

For more information, contact us at:

CyberPower Systems (USA), Inc.

5555 12

Avenue East

Suite 110

Shakopee, MN 55379

Tel: (952) 403-9500

Fax: (952) 403-9500

Email:

[email protected]

Web:

www.cyberpowersystems.com

PowerPanel™ is a trademark of CyberPower Systems (USA), Inc.

Advertising

Popular Brands

Popular manuals