Harbor Freight Tools 93213 - Manual (Page 2)

Page 2 For technical questions, please call 1-800-444-3353. SKU 93213
SAVE THIS MANuAL
Keep this manual for the safety warnings
and precautions, assembly, operating,
inspection, maintenance and cleaning
procedures. Write the product’s serial number
in the back of the manual near the assembly
diagram (or month and year of purchase if
product has no number). Keep this manual
and the receipt in a safe and dry place for
future reference.
IMPORTANT SAFETY
INFORMATION
In this manual, on the labeling, and
all other information provided with
this product:
This is the safety alert
symbol. It is used to alert
you to potential personal
injury hazards. Obey all
safety messages that follow
this symbol to avoid possible
injury or death.
dANgER indicates a
hazardous situation
which, if not avoided, will result
in death or serious injury.
WARNINg indicates a
hazardous situation
which, if not avoided, could
result in death or serious injury.
CAuTION, used with
the safety alert
symbol, indicates a hazardous
situation which, if not avoided,
could result in minor or moderate
injury.
NOTICE is used to
address practices not
related to personal injury.
CAuTION, without the
safety alert symbol, is
used to address practices not
related to personal injury.
SAFETY WARNINgS ANd
PRECAuTIONS
WARNINg! When using tool, basic safety
precautions should always be followed
to reduce the risk of personal injury and
damage to equipment.
Read all instructions before using this
tool!
Keep guards in place 1. and in working
order.
Keep work area clean.
2. Cluttered areas
invite injuries.
Observe work area conditions.
3. Do
not use machines or power tools in
damp or wet locations. Don’t expose to
rain. Keep work area well lighted. Do
not use electrically powered tools in the
presence of flammable gases or liquids.
Keep children away.
4. Children must
never be allowed in the work area. Do
not let them handle machines, tools, or
extension cords.
Make workshop kid proof
5. with
padlocks, master switches, or by
removing starter keys.
Store idle equipment.
6. When not in use,
tools must be stored in a dry location to
inhibit rust. Always lock up tools and
keep out of reach of children.
use the right tool for the job.
7. Do
not attempt to force a small tool or