CREATIVE Live! Drive IR SB0010 - Manual (Page 9)

Live! Drive IR Quick Start SB0010 9
Step 3:
Connect to the
SB Live! Card
Connect the dark grey flat cable to Sound Blaster Live!’s AUD_EXT header.
If you have difficulty connecting to the AUD_EXT header:
1. Remove the Sound Blaster Live! card from its PCI slot.
2. Connect the dark grey flat cable to Sound Blaster Live!’s AUD_EXT header.
3. Align the Sound Blaster Live! card with the vacant PCI expansion slot. Press the card gently
and evenly into the slot as shown in Figure 5. Ensure that the card is seated firmly inside the
PCI expansion slot.
4. Secure the card to the expansion slot with a screw.
Do not force the audio card into
the slot. If it does not fit properly,
gently remove it and try again
.
Figure 5: Securing the audio card to the PCI
expansion slot.
Unused brackets
ii. Fasten the card
to the slot with a
screw.
i. Gently press the
audio card into
the slot.
PCI slot
ISA slot