Using the self-timer – Casio QV-10A User Manual

Page 12

Advertising
background image

45

Recording Images

Under exposure

Over exposure

Exposure Warning Indicators

Exposure warning indicators appear on the LCD whenever the light
being picked up by the lens would result in under exposure or over
exposure of an image.

Use the procedure described on page 42 to change the aperture or
change the lighting of the image so the indicator disappears from the
LCD.

Important!

• The exposure warning indicators also appear when lighting is out-

side the range of the camera. In such a case, changing the aperture
will not clear the indicator from the LCD.

• The manual exposure adjustment procedure (page 41) cannot be

used when an exposure warning indicator is on the LCD. Clear the
warning indicator by changing the aperture switch setting.

Operation

46

Low Battery Indicator

The low battery indicator (

) appears on the LCD whenever re-

maining battery power drops below a certain level.

If you want to record more images, you must first delete some of the
images already stored in camera memory. See page 70 for details on
how to delete images.

When this indicator appears, replace all four batteries with a fresh set
of new ones. Once the low battery indicator appears, you can expect
only about 10 more minutes of operation before total power failure.

• See page 25 for details on how to replace batteries.

Memory Full Message

The message “MEMORY FULL” appears on the LCD whenever you
press the shutter button while camera memory is full.

47

Recording Images

Using the Self-Timer

With the Self-Timer, the shutter is released 10 seconds after you
press the

/PROTECT button.

1.

Enter the Record Mode.

Set the function switch to the REC
position.

2.

Start the Self-Timer operation.

Place the camera securely on a
tripod, desk or other stable sur-
face, with the image to be re-
corded in the LCD.

After composing the image, press
the

/PROTECT button.

A 10-second countdown starts on
the LCD. The shutter will release
automatically when the end of the
countdown is reached.

To cancel on ongoing Self-Timer
operation, press the

/PRO-

TECT button or shutter button.

Operation

48

Note

• If you use the Self-Timer with the lens body rotate 180

°

(page 38),

you can view the countdown on the LCD while waiting for the shut-
ter to release.

Important!

• If battery power is low, camera power may turn off while a count-

down is in progress. If this happens, replace the batteries with new
ones.

Advertising
This manual is related to the following products: