Operation, Know your lawn mower, Meets cpsc blade safety standards – Craftsman 247.38824 User Manual

Page 9

Advertising
background image

9

Know Your Lawn Mower

Read this owner’s manual and safety rules before operating your lawn mower. Compare the illustrations in Figure
10 with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this
manual for future reference.

WARNING: The operation of any lawn mower can result in foreign objects being thrown into the
operator’s eyes and causing severe eye damage. Always wear safety glasses while operating the
mower, or while performing any adjustments or repairs on it.

Figure 10

Gas Tank Cap

Recoil Starter

Oil Fill Plug

Adjustment Lever

Front Height

Spark Plug Wire

Primer

Rear Height Adjustment Lever

Grass Catcher

Blade Control
Handle

Meets CPSC Blade Safety Standards

Craftsman Walk-Behind Lawn Mowers conform to the safety standards of the American National Standards Institute

and the U.S. Consumer Product Safety Commission.

OPERATION

WARNING:

This blade control mechanism

is a safety device. Never attempt to bypass
its operations.

Height Adjustment Lever

These levers are located on each wheel and are used
to adjust the cutting height. All four levers have to be at
the same relative position to ensure uniform cut.

Recoil Starter

The recoil starter is attached to the handle. Stand
behind the unit and pull the recoil starter to start
the unit.

Primer

The primer is used to pump gas into the carburetor.
Use it to start a cold engine, but do not use it to
restart a warm engine after short shutdown.

Blade Control Handle

The blade control handle is located on the upper
handle of the mower. The blade control handle must
be depressed in order to operate the unit. Release
blade control handle to stop engine and blade.

O

P

E

R

A

T

IO

N

Advertising