Cisco 4430 User Manual
Page 5
1-5
Cisco Content Router 4430 Hardware Installation Guide
78-12541-01
Chapter 1 Introducing the Content Router 4430
System Hardware Features
Warning
To avoid electric shock, do not connect safety extra-low voltage
(SELV) circuits to telephone-network voltage (TNV) circuits. LAN
ports contain SELV circuits, and WAN ports contain TNV circuits.
Some LAN and WAN ports both use RJ-45 connectors. Use caution
when connecting cables.
Table 1-3 describes the LEDs on the front panel.
Slot 0
Bay for hard drive 0.
Slot 1
Bay not used.
Back Panel
Power receptacle
The power cord connects to this plug.
Power switch
This switch toggles between on and off, even though
the switch always returns to its initial position after
you press it.
A power light on the front panel, when lit, indicates
that the power is on.
Table 1-2
Ports and Receptacles (continued)
Item
Description
Table 1-3
LEDs
Indicator
Color
State
Description
Power
Green
On
Power is flowing to the Content Router.
System
Green
On
The network connection is active
(packets are being sent or received).
LINK
Green
On
The Content Router is connected to the
network.
100 Mbps
Green
On
The connection is a 100BASE-TX
(Fast Ethernet) connection.
Slot 0
Green
On
Slot 0 is active.
Slot 1
Green
On
Slot 1 is active.