To receive data from the bn unit on the pv unit – Casio PV-S6100 User Manual
Page 132
130
Chapter 12 Data Communication
To receive data from the BN Unit on the PV Unit
1. Perform steps 1 through 4 under “To send data from the PV Unit to the
BN Unit”.
2. On the screen that appears, tap the button next to Receive.
3. Tap Set.
4. Tap the check boxes next to specify the data you want to receive (checked)
and the data you do not want to receive (unchecked).
5. After everything is the way you want it, tap Set.
6. Turn on the power of the BN Unit and then press the START button on
its cradle to start the data transfer operation.
Notes
•
The above procedures can be used to send or receive all data in specific
modes only. You cannot send or receive individual data items.
•
Data communication can be interrupted at any time by tapping Esc.
•
If the secret memory area is accessed on a unit receiving data, the received
data is stored in the secret memory area, regardless of the memory area
the data is in on the sending unit.
•
Transferring data from the PV-S1600 to the BN Unit causes all euro
symbols to be replaced by spaces.
•
The following shows the relationship between data when received by
the PV Unit from a BN Unit.
•
The Company entry of the PV Unit is equivalent to the Employer entry
of a BN Unit.
Mode
Contacts
Scheduler
Memo
PV Unit
Personal
Business
Schedule
To Do
Reminder
Memo (Untitled 1)
BN Unit
PERSONAL
BUSINESS
SCHEDULE
TO DO
REMINDER
MEMO