Crest Audio HPW - Manual (Page 27)

rear panel connectors
The connectors associated with all the Stereo Inputs are located on the rear panel. Line
Input 1 has 1/4” TRS jacks, Line Input 2 has unbalanced RCA inputs. The TRS inputs are
balanced and can accept either balanced or unbalanced signals.
direct out, 1/4" TRS jack - The input channel's signal is available at this output
jack. The default signal routing is derived Pre-fader/Post-EQ. This can be changed by
an internal option to Post-insert/Pre-EQ. The output jack is TRS, tip = left, ring = right,
sleeve = ground.
line 2, RCA input jack -
These RCA input connectors are active when Line 2 is
selected
line 1, 1/4" TRS jack - These 1/4” TRS input connectors can be used for balanced
or unbalanced sources and are active when the Line 2 switch is in the “UP” position.
p. 27
HPW TM owner’s manual
stereo inputs 5