550t azur, Remote control, Technical specifications – Cambridge Audio AZUR 550T User Manual

Page 7: Troubleshooting

Advertising
background image

550T

azur

7

ENGLISH

Remote control

The 550T is supplied with a system remote
control that operates both this tuner and
Cambridge Azur amplifiers.

Power

Switches the 550T between On and Standby
mode. The blue LED on the front panel of the
550T indicates that it is On when bright and
in Standby mode when dim.

1–10 keys

These allow access to any stored presets you
might have saved in the 550T.

10 + key

Allows access to preset stations 11-20.

Store

To store a preset with the remote press Store
then use the

buttons to select the

desired preset location. Press store again to
confirm.

FM/AM

This button switches between the FM and
AM bands that the 550T is capable of
receiving.

For use with Tuning, Alarm and Clock
settings.

Mode

Toggles between Scan and Preset modes,
thereby changing the functionality of the

buttons.

Clock

This button is used to access the Alarm
menu as discussed in the Operation
Instructions section of this manual.

(Info)

Switches between the Display modes described in the Front Panel
Controls section. The RDS information on the FM band is dependant on
the strength of the signal.

Bright

Alters the brightness of the display backlight. There are three levels of
brightness: Bright, Normal, and Off.

Please note that the following buttons will only operate a matching
Cambridge Audio azur amplifier:

Volume

Volume buttons to increase or decrease the Volume of the amplifier
output.

Source select

The five Source Select buttons and the Tape Monitor Select button are
used to change the input source (CD, DVD etc).

Mute

This button mutes the audio on the amplifier. The Mute mode is indicated
by the channel LED flashing.

Technical specifications

Frequency Range

FM (87.5–108MHz) Europe
FM (88–108MHz) US
AM (531–1602kHz) Europe
AM (530–1710kHz) US

Aerial Inputs

75 ohms unbalanced (FM)
50 ohms unbalanced (AM)

FM Sensitivity

-25dBm typical

Signal to Noise

50dB typical (FM)
47dB typical (AM)

FM Frequency Response (±3dB) 20Hz - 15KHz

Distortion

<0.3%, @ 1KHz, 50KHz deviation (FM)
<0.9%, @ 1KHz (AM)

Stereo Separation @ 1KHz

>50dB (FM)

Maximum Power Consumption 7W

Standby Power Consumption

6.5W

Dimensions – H x W x D

70 x 430 x 305mm (2.75 x 17 x 12”)

Weight

4.10kg (9 lbs)

Troubleshooting

There is no power

Ensure the AC power cord is connected securely.

Ensure the plug is fully inserted into the wall socket and is switched on.

Check fuse in the mains plug or adaptor.

There is no sound

Ensure that the amplifier is set correctly.

Check that the interconnects are inserted correctly.

The aerials are incorrectly connected.

The sound is distorted or garbled

Check aerial connections and placements.

There is a hum coming from the speaker

Ensure that all cable connections are secure.

There is unwanted background noise and interference

Move the tuner away from other electrical equipment that is likely to cause
interference.

The remote handset will not function

Check that the batteries have not expired.

Ensure that nothing is blocking the remote sensor.

CD

Tuner

DAB

DVD

Tape
Mon

Store

FM/AM

i

Mode

Vol

Vol

MP3

Aux

Advertising