Crestron electronic Mud Ring Mount Kit for Cameo 2 MMK-CBF-T - Manual (Page 7)

Crestron MMK-CBF-T Mud Ring Mount Kit for Cameo
™
2
Installation Guide – DOC. 6637A Mud Ring Mount Kit for Cameo™2: MMK-CBF-T • 5
Insert and Secure Mud Ring
3. When the mud ring is in position, loosely secure with four #6
drywall screws (not supplied). The length of the screws should not
exceed the wall thickness by more than ½ inch.
4. Verify that the mud ring is level.
NOTE: Do not over tighten the screws. Doing so may over-dimple or rip
the mud ring.
5. Use a screwdriver to tighten the drywall screws by hand so that
they slightly dimple into the holes in the mud ring.
6. Apply drywall compound as needed to finish the cutout.
7. When dry, refer to the latest version of the Cameo 2 Keypads
Operation & Installation Guide (Doc. 6603) to complete the
installation.