Getting started, Antenna, Battery information – Uniden HH979XL User Manual

Page 11: Installation, Recharging the nickel-cadmium battery pack

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

GETTING STARTED

Antenna

To attach the antenna to the TNC connector on top of your

radio, press down and rotate the antenna base clockwise

until It seats firmly into place.

Battery Information

The HH979XL comes with a standard rechargeable Ni-Cd

Battery Pack. An optional heavy duty rechargeable Ni*Cd
battery pack is also available.

Installation

THE RECHARGEABLE NICKEL-CADMIUM BATTERY

PACK MUST BE CHARGED FULLY BEFORE USING IT
FOR THE RRST TIME.

When Installing or removing the rechargeable Battery Pack,
be sure that the power (ON/OFF Volume control) is turned
OFF.

To remove the Battery Pack, push up on the release button
and slide the Battery Pack away trom the radio. To replace,
align the Battery Pack rails with the transceiver and slide
toward the transceiver unit until the Battery Pack locks In

Recharging the Nickel-Cadmium Battery Pack

Note: Before charging, be sure that the power (ON/OFF

Volume control) is turned OFF. Recharge the Ni-Cki

Battery ONLY when the Unit indicates LOW Battery
condition. (TX LED blinks during TRANSMIT).

Insert the discharged Battery Pack in the rapid charger, or

connect the trickle charger to the side ot the unit.

In the trickle charger, the standard pack charges fully in 8

hours, and the heavy duty pack in 12 hours. In the rapid
charger, the standard pack charges fully In 1.5 hours, and

the heavy duty pack charges tully in 2 hours.

DO NOT leave the Batteries on charger for an extended

period of time.

Page 9

HH979XL

Advertising