Remote control buttons – Vizio M260VP User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Remote Control Buttons
POWER
( ^ )—Press to turn the TV on from the Standby mode. Press
it again to return to the Standby mode.
CEC-Supported Buttons:
CEC needs to be set up and enabled for these buttons to work. See
CEC section on page 40 for more information.
• (Record)—Press to begin recording on your CEC-supported
device.
II (Pause)—Press to pause playback on your CEC-supported
device.
► (Play)—Press to start Playback on your CEC-supported
device.
■ (Stop)—Press to stop playback/recording on your CEC-
supported device.
(Previous)—Press to skip the previous track on your CEC-
supported device.
◄◄ (Reverse)—Press to reverses playback on your CEC-
supported device.
►► (Fast Forward)—Press to fast forward playback on your CEC-
supported device.
►M (Next)—Press to skip to the next chapter on your CEC-
supported device.
EXIT
—Press to exit from open menus.
MENU
—Press to open the On-Screen Display (OSD) menu.
OK
—Press this button to display the Channel List. Press to confirm
selections for On-Screen Display (OSD) menus.
A T ◄ ►
—Press to navigate the OSD menu. They will also be used as
value settings when the slide bar is shown on the screen and option
settings to turn a feature off or on.
BACK
—Press to return to a previous OSD menu. Press repeatedly to
close the OSD.
GUIDE
—Press to display detailed program information when viewing a
digital TV program.
Color Buttons (Yellow, Blue, Red, & Green):
•
Yellow
—This button performs the same function as the “A” button on your Cable or Satellite box
when using the remote to control your pre-programmed
Cable/Satellite Box DVR.
•
Blue
—This button performs the same function as the
“B” button on your Cable
or Satellite box
when using the remote to control your pre-programmed
Cable/Satellite Box DVR.
•
Red
—This button performs the same function as the
“C” button on your Cable
or Satellite box
when using the remote to control your pre-programmed
Cable/Satellite Box DVR.
•
Green
—This button performs the same function as the “D” button on your Cable or Satellite box
when using the remote to control your pre-programmed Cable/Satellite Box DVR.
VOL
+/—Press to turn the volume up or down.
MEDIA
- Use this button to access the USB drive to view your pictures.
MUTE
—Press to turn the sound on and off.
LAST
— Press to recall the previously viewed channel.
CH
+/—Press to change the channels up or down
HDMI
—Press to select the HDMI input. Press repeatedly to cycle between both HDMI inputs.
VIZIO M260VP User Manual
16