Rear panel connectors, Servicing your transceiver – Uniden SEA-DOLPHIN MC2700 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
REAR PANEL CONNECTORS
1, ANTENNA CONNECTOR: This female connector permits connection of the
transmission line cable male connector (PL-259) to the transceiver.
2, EXTERNAL SPEAKER: The External Speaker Jack is used for remote receiver
monitoring. The external speaker should have 8-ohm impedance and be rated to
handle at least 4,0 watts. When the external speaker is plugged in, the internal
speaker is automatically disconnected.
3, POWER: This jack permits connection of the D.C. power to the transceiver, A
power cord with polarized plug is supplied with the radio. The polarized plug
ensures that the power will always be connected properly.
SERVICING YOUR TRANSCEIVER
The technical Information, diagrams and charts will be supplied upon request. It is the user’s
responsibility to see that this radio is operating at all times in accordance with the DOTAC
Inshore Boating Radio Communications Service regulations. We highly recommend that you
consult a qualified radio telephone technician for the servicing and alignment of this marine
radio product.
Please refer to the WARNING information contained in the 1st page of this Owner's
Manual.
(NOTE; When ordering parts, it is essential to specify the correct model number and
serial number of the unit.)
- 6 -