Bose 901 Series III User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

B. 110-220 VAC VOLTAGE CONVERSION

The BOSE Series III Equalizer is designed to operate on one

power line voltage only. If it becomes necessary to convert your

equalizer to another line voltage, contact the closest BOSE

Authorized Factory Service Agency or the BOSE factory. (The

speakers require no voltage conversion.)

C. IN CASE OF DIFFICULTY

If you suspect that there is a problem with your 901 system, it
Is worth a few minutes of your time to determine whether your

901 s are defective, and if so. what part of the system is defective.

If one speaker sounds defective, DO NOT switch the speaker

cables, as this may damage the speaker operating correctly.

Instead, disconnect the defective speaker s wire at the ampli­

fier output and reconnect to the amplifier channel operating
correctly (This can generally be done without disconnecting
the correctly functioning speaker.) If the speaker system that
sounded defective now plays correctly, the difficulty is not in

the speakers or in the speaker wiring.

If bass and high frequencies seem weak, check to assure that

the equalizer is in the circuit.

If you hear distortion when both speakers are operating at high

sound levels that disappears when you turn the volume down

or switch the "Below 40“ switch to "Contour." you are probably
overloading the amplifier

If the trouble seems to be in the equalizer, be sure that the sys­

tem operates properly with the equalizer out of the circuit. This

can be determined by disconnecting the equalizer from the

circuit. Be certain that all cables are connected properly and
that the cables are not defective.

If the trouble still persists, contact your dealer. He will arrange

for service or have the unit checked for proper operation. The

complete procedure for obtaining service is outlined in the
warranty found in SECTION VIII of this manual.

D. CARE AND MAINTENANCE

Your 901 speaker cabinets and equalizer are made with an oil-
rubbed walnut veneer finish. Any good grade of furniture polish

used for wood finishes can be used In normal dusting and

cleaning; however, to maintain the beautiful appearance of
your 901s. we suggest occasionally rubbing the cabinet with

linseed oil. After rubbing, use a dry cloth and polish off any

excess oil.

Grille cloths generally require no care, although they may be

carefully vacuumed if necessary.

!9

Advertising