Setting up – Bose Home Theater Speakers V-100 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
Setting Up
Make the connections
At the connection end of the speaker, slide one terminal lever
aside and insert the appropriate wire (Figure 6).
1. Connect one end of the speaker cord to your speaker.
a. Attach the marked wire to the red (+) terminal.
b. Attach the plain wire to the black (-) terminal.
2. Connect the other end of the same cord to your receiver
or amplifier (Figure 7).
a. Attach the marked wire to the red (+) terminal.
b. Attach the plain wire to the black (-) terminal.
• The video speaker connects to the CENTER
SPEAKER outputs. Some surround sound receivers
have two sets of center channel speaker outputs.
Use either set.
• The left surround speaker connects to the LEFT
SURROUND SPEAKER outputs.
• The right surround speaker connects to the RIGHT
SURROUND SPEAKER outputs.
Red terminal
lever
Figure 6
How to make terminal
connections