Fail-resistant operation – Bose X User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To ptóce the mic for best communication
clarity and noise rejection, locate the micro
phone housing so that it is just brushing your
lips. The microphone is properly positioned
when the word ‘TALK' on the mic housing
faces your mouth,
The boom is intended to pop out of the clip if
the Headset is dropped. To rei^ace
boom, snap the coupling into the clip so that
one of the rectangular faces on the coupling is
visible when the boom snaps into place. Also
be sure that the coupling sits flush against
the flat - rK>t angled - face of the clip.
Adjusting the volume
The volunrve for your Headset is controlled by
your Interface. Foliov/ the instructions for
adjusting the volume in your Interface owner's
manual.
Avoid setting your volume controls at high
levels that may affect your hearing during
extended periods of Headset use.
Fail-resistant operation
The Headset will provide communication and
the earcups will block some noise even with
the po’-ver switch on your Interface turned off.
bypassing all active r>oise reducing electron
ics. Turn the Interface off if you suspect there
may be a problem with the Headset; for more
information refer to the section entitled “In
Case of Difficulty* on page 10.