4. panel separation kit (pg-4k/4l), Fig. 2), 4. panel separation kit – Kenwood TM-741A User Manual
Page 68: Pg-4k, Pg-4l
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
7-4. PANEL SEPARATION KIT
(PG-4K/4L)
PG-4K
Power
Supply
PG-4L
DC Cable (6m)
Speaker Cable (5m)
1. Slide the release button on the front panel to the
right. Pull the front panel unit toward you from the
right, then remove the whole panel unit. Be careful
with the cord connecting the front panel unit and the
main unit. ( Fig. 1)
( Fig. 1)
Be careful with
this cable.
(Fig. 1)
Remove the holder.
(Fig. 2)
2. Unplug the microphone from the main unit, and
remove the black plastic cord holder by pushing up on
the front. (Fig. 2)
3. Unplug the front panel cord connected to the
transceiver main unit and connect the PG-4K/4L
front panel cable to the transceiver.
(Fig. 3)
68