Uniden 310e - Manual (Page 7)

TROUBLE SHOOTING
If your PRO 3I0e is not performing up to
your expectations, please try these simple
steps. If you still cannot get satisfactory
results after reading this manual and fol­
lowing the troubleshooting steps, please
call your local dealer.
TROUBLE
If you determine that service is necessary
contact your local dealer or pack the unit
in its original carton. Send it along with a
brief, concise description of the problem,
your name, address, phone number, and a
copy of the original purchase receipt to
the address listed in the warranty.
CHECK
Unit will not turn on. I. Check power cord and all
No power connections
2 Check power cord fuse.
3. Check vehicle electrical
system.
4. Check battery pack
connection.
5, Check if batteries are
weak.
Poor reception 1. Check and adjust Squelch.
2. Check antenna system and
cable, connectors,
3. Make sure antenna is
fully extended.
4. Check operation mode of
the radio.
Weak transmission 1. Check antenna system and
cable, connectors.
2. Make sure antenna is
fully extended.
3. Check antenna grounding.
4. Check for corrosion on
connectors.