Specifications – Uniden PRESIDENT LTD 950 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SPECIFICATIONS
GENERAL
Channels
Controls
Status Indicators
Channel Display
Selector Switch
Buttons
Connectors
Size
Weight
Supply Voltage
Standard Accessories
Antenna Impedance
Microphone
Speaker
Operating Temperature
Range
Shock and Vibration
FCC Approvals
Transmit
55
Receive
80 Marine
10 Weather
On-Off/Volume, Squelch
TX LED (transmit)
DUAL, SEEK, SCAN, USA, INT'L, HI, LO.
[
f
], WX,«^ , FISH, USCG, and MEMO
on LCD Pane!
LCD (Dual 7 segment)
Rotary Channel Selector
HLD, DIM, H/L, SCN, Cl6, F/C, and GRP
Antenna, remote speaker and DC power
(2 1/5"Hx6 2/5"Wx8"L)
2,4 lbs
13.8V DC negative ground
Mounting bracket and hardware, DC
power cord, mike hanger, spare fuse,
50 ohms, nominal
Rugged 500 ohms dynamic element with
coiled cord.
1.82 Inch, 8 ohms
-20‘=’C to +50^ (-4“F to +122“F)
Meets or exceeds EIA standards, RS152B
and RS204C
Type accepted under part 80 of the Rules;
meets Great Lakes Agreement and party
boat requirements.
TRANSMITTER
Power Output
Power Requirement
Modulation
Hum and Noise
Signal-to-Noise
Audio Distortion
Spurious Supression
Output Power Stabilization
1 watt or 25 watt (switch selectable)
1 watt output; 1 OA @ 13.8V DC
25 watts output: 4.5A @ 13.8V DC
FM,
±
5 kHz deviation (FCC designator
F3E)
45 dB @ 3 kHz
Less than 5% with 3 kHz deviation with
1000 Hz modulating frequency
-60 dB @ 1 watt, -65 dB @ 25 watts
Built-in automatic level control (ALC)
18