Kenwood SPECTRUM 1050 AV User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1
9 If the center channel is not the same volume as the
left and right speakers, use_the ► and M buttons to
adjust
It
so
It
plays the test noise at the same volume.
The test noise stops cycling and remains in the center
channel while it's being adjusted.
The integrated amplifier displays the level of the
center channel while It's being adjusted.
10 If the surround channel Is not the same volume as the
other speakers, use the >► and buttons to adjust
it so it plays the test noise at the same volume.
The test noise stops cycling and remains in the
surround channel while it’s being adjusted.
The integrated
amoUfier
displays
the level
of the
surround cnannei
while
it's being adjusted.
11 When all of the channels sound like they’re the same
volume, you've balanced your system.
12 Press the FUNCTION button on the remote to turn
off the test noise.
You can also make the adjustments by using the
CENTER LEVEL and REAR LEVEL buttons on the inte
grated amplifier's front panel (but it's easie-" w'lth the
remote because you can sit in the listening area).
27