I initial settings (continued), Initial settings, Eubue) – Uniden TL32TX1-AW User Manual
Page 19: Iэ pi 0, Continued)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
Initial Settings
(continued)
Press the B button.
TV starts auto detect program for
receivable analog and digital broadcast signals.
Initial Setup
Searching for stations now
Please wait,,.
20% finished
I
Э
PI
0
EUBUE)
• With poor reception, TV might not be abi© to receive broadcast station successfuliy.
• if no screen is displayed, please see Trouble Shooting ( page 53).
CO
Ч
c
“0
When the automatic setup ends, the Program Edit menu appears with the first assigned channel
on screen. Use the 0 0 buttons to check the channel numbers end the stations they are
tuned to.
To edit the scanned channels (to delete CHs which have poor reception), page 47, Press
the Ы button to exit from program edit.
•
The automatic channel setup program starts the first time the TV is turned on.
*
The automatic channel setup program can also be run from the channel setup menu (0^ page
46). You can also check how channels have been assigned.
If you turn the TV off before automatic channel setup is completed, the initial setup screen will be dis
played again when the TV is next turned on.
r<!
• When the Initial Setup is completed, the Program Edit screen displays automatically.
• If you proceed to Auto Program without connecting an antenna the TV will not be able to tune in
any channels. Make sure an antenna cable is connected and then choose Auto Program from
setup menu ( p a g e 46).
19