Setup, Power, Installing batteries – Uniden UBC60XLT User Manual
Page 7: Setup power
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Setup
Power
Installing Batteries
1. Open cover.
3. Replace cover.
IMPORTANT
If you are installing Alkaline
Batteries, set the switeh to
“Reg. Aik ВАТТ." If
installing Nickel-Cadmium
Batteries, set the switeh to
"Ni-Cd ВАТТ."
WARNING! Do not mix
Alkaline Batteries with
Nickel-Cadmium
Batteries. Be sure to
install four
Safierfes of
the same type._________
Advertising