Belt clip, Operation – Uniden POCKET MAX UHO45XR User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BELT CLIP
Installing the belt clip:
1. Slide ihe belt clip into place in the belt
c\\p
slot as
shown In figure 4,
2. Ensure that the dip locks in place by listening
for o ''dick".
Removing the belt clip:
1. Pull the belt dip lotcK away from the unit as shown
in figure 5,
2. While pulling the latch, push up on the belt dip to
remove it from the radio.
OPERATION
Turning the unit ON / OFF
*
Turn the Volume Knob clockwise. The unit will
"beep" and the display will oppear
*
Turn the unit off by rotating the Volume knob
counterclockwise until you hear a "click".
Adjusting the volume
*
Press ond hold the monitor button and adjust the
volume to desired level.
10