Change pin (password), Reset locks, Menu language – Vizio M320NV User Manual
Page 40: Time & local settings time zone, Cec function, Time & local settings cec
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VIZIO M320NV and M370NV User Manual
Change PIN (Password)
Enter a new, 4-digit password using the number buttons on the remote control. Enter it a second
time to confirm you entered it correctly.
Note: Make sure you write down and store the new password in a secure place. The Reset Locks
feature does NOT reset the password.
RESET LOCKS
Return all Parental Control lock settings to factory default. A screen will come up to confirm your
selection or to cancel it. Press ◄ or ► to make the selection, and then press OK to accept it.
Are you sure you want to RESET ALL
LOCKS SETTINGS to the factory
defaults?
Menu Language
Select to change the language of the menu. The default is English. You can also select French or
Spanish.
Time & Local Settings
Time Zone
Setting the correct Time Zone for your area will ensure that the correct time is shown after
pressing the GUIDE button on the remote control.
Daylight Saving
Setting the daylight saving time for your area will ensure that the correct time is shown after
pressing the GUIDE button on the remote control.
Device Discovery
CEC
Consumer Electronics Control allows you to control other devices using your HDTV remote control when
those devices are connected via HDMI. For example, if a CEC-supported Blu-ray DVD player is
connected to your HDTV through HDMI-2 and that player is powered on, your HDTV will automatically
change to the HDMI-2 input. Similarly, if your HDTV is powered on first and
your change the input to HDMI-2, your Blu-ray player will automatically
power on.
Also, you can control your CEC-supported device using the transport keys
on your HDTV remote control (e.g. Play, Stop, Prev, etc.). When you press
one of the buttons on your HDTV, the action will occur on your device.
Contact your devices’ user manual or manufacturer to check whether your
device supports CEC.
CEC Function
Turn CEC Cn or Cff. When set to Cff, your HDTV will not send or
receive any CEC commands.
Device Discovery
Register device with TV. Before CEC will work, perform a Device
Discovery to see if there are any CEC supported devices
connected to your HDTV.
Turn connected device control On or Off
EXIT
®
40