About memory back-up, Cd cd cd cd cd cd, Cdcdcdcdcdcdcd – Uniden UBC144XLT User Manual
Page 11: Programming frequencies
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Before you can use your
UBC144XLT,
you must follow these steps to program the
channels, except weather frequencies.
Programming Frequencies
CD CD CD
CD CD CD
(DQ
Example: Program 420,150 MHz into Channel 12,
Press (*>t*w№L) to stop scanning.
To select the channel (12), press (
1
). then i~2 ) on the
numeric keypad.
Then press (■
m
>
mu
>
l
)
again.
Type in the frequency numbers, including the decimal
point using the numeric keypad;
CDCDCDCDCDCDCD
The decimal point (( • )) appears as a dash (-) on the
channel display.
Press CH) to complete the entry.
About Memory Back-up
Your
UBC144XLT
has a convenient type of memory badc-up system. In the event of
a power failure, the scanner provides approximately 7 days of memory retention so
you don’t immediately lose the frequencies stored in any of the channels.