Installation-connecting power, Warning – Uniden MC 800 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation-Connecting Power
The MC 800 will work with any ship's 12 volt nonninal DC voltage,
(see specifications for more details} Connect the power cable fur
nished to a DC source capable of supplying at least 1.0 amperes of
current. The power leads should normally be routed to the ship's DC
power distribution panel (on larger boats} or directly to the battery
main circuit breaker (on smaller boats}.
Be sure to observe the proper polarity when connecting the power.
The red lead wire of the power cable should be connected to the
positive terminal, and the black lead should be connected to the
negative terminal.
Warning
The indicator unit is protected by an inline 1.0 ampere fuse. To
reduce the risk of fire or electric shock, replace this fuse only with
one of the proper specification.
- 11 -