Vizio VA320M - Manual (Page 2)

WHERE VISION MEETS WRLUE"
QUICKSTART GUIDE
Attaching the TV stand base Programming your TV to Receive and Display Channels: AM you need is your Remote Control.
Ensure the stand neck collar is fitted onto
the stand neck.
Push the stand base onto the stand neck.
The base plate retainer screw is shipped in a
bag taped to the bottom of the Base Plate.
Remove the screw from the bag and screw it into
the center hole in the base plate and tighten.
Move the TV into an upright position.
□ Receiving Channels through DTV/TV Input
using Regular Antenna or Regular Cable Service
(No Box) Signals. B Displaying Channels from different Signal Sources (External TV Tuner, VCR, Cable Box
or Satellite Receiver) through different Inputs.
STEP 1.1
O Connect your signal source (cable
from antenna or cable from the wall for
Cable Service without box) directly to
the DTV/TV RF (commonly named
COAXIAL) connector.
STEP 1.2
O Turn on the TV. The Welcome menu screen
should appear. If this screen does not appear
see User's Manual for TV Setup.
0 Highlight your desired language and press
MENU to continue.
0 Select your location. Choose Home Mode for
energy savings. Press
MENU to continue.
© Select your Time Zone and press MENU
to continue.
© If Daylight Saving is observed, select Yes.
Press MENU to continue.
0 Select your type of signal and press MENU
to continue. The TV will start scanning
for channels.
© While scanning the screen will show the
channel number, channel name and strength
of the signal of the channel.
© After scanning is complete, you can either
press MENU to continue or wait for the TV
to display the first channel scanned.
RGB PC
®®-®®® COMPONENT 1
COMPONENT2
STEP 2.1
O Select the correct input connection; RF (DTV/TV)* connector.
Composite (Yellow, Red and White)* connectors. Component (Red,
Green, Blue plus Red and White)* connectors, HDMI* connectors or
S-Video (AV)* plus Red and White connectors (if applicable).
Make the physical connection or hook up.
STEP 2.2
O Turn on the TV. The Welcome menu screen should appear. Select your desired
language and press MENU to continue.
© Select your location. Choose Home Mode for energy savings.
0 Repeatedly press the MENU button until the Channel Scan displays.
Select Stop Scan and then Quit.
© If you have an HD service you must use the HDMI (best) or Component connection.
NOTE: Composite and S-VIDEO Cables can only be used for SD (4801) pictures.
© Turn on your Cable Box, VCR, External TV Tuner or Satellite Receiver and you will see a picture on your TV set. If there is not a
picture, make sure you have selected the correct input on the TV set.
© If the selected input is RF connection, you should be aware that the TV set needs to be on either channel 3 or channel 4 matching the
channel which has been selected on the back of the VCR, Cable Box, External TV Tuner or Satellite Receiver; please refer to Owner or
User's Manual of such equipment for details.
NOTE: The TV set will be displaying any television station or program selected by the Cable Box, VCR, External Tuner or Satellite Receiver. The TV
set will not be able to change programs or channels; this is controlled by the equipment sending the signal. If the service being used includes a box
with two different outputs for two different (distant) rooms, then scanning channels should help to find the signal. Be aware that the channel to be
selected varies from provider to provider, meaning you may have to call your provider company so they can provide you with the specific channel to use
with high-definition TV sets. Some examples of these channels are: 105,106,115 and 116.
For Your Information:
O Coaxial connection (RF connector) is recognized as the threaded connector, commonly
called cable, screw on or coaxial connector which carries the image (picture) and sound
(audio) through a single cable.
© Composite connection (RCA connectors) is recognized by the three (yellow, red and
white) standardized color coded RCA connectors. Yellow carries the image (picture); red
(right channel) and white (left channel) carry the sound (audio) of the signal.
© Component connection (RCA connectors) is recognized by the three (green, blue and
red) standardized color coded RCA connectors for image (picture) plus the two (red and
white) standardized color coded RCA connectors for the sound (audio) of the signal.
© HDMI (High-Definition Multimedia Interface) connection (HDMI connector) is
recognized by the standardized elongated D-Shaped connector which carries both the
image (picture) and the sound (audio) of the signal through a single cable.
© S-Video (separate video) connection (4-pin Mini-DIN connector) is recognized by the
small connectors at the end of a cable with multiple pins in it. This connection carries only
the image (picture) of the signal; therefore, there is a need to supply a separate sound
(audio) signal by using the two (red and white) standardized color coded RCA connectors.
Programming Your Cable or
Satellite Box Remote
Consult your Cable or Satellite Owner's Manual to determine if you
need a 3, 4 or 5-digit code. If your Cable or Satellite Box requires:
• 3-digits, please use "627" (This code usually works with DISH Network.)
• 4-digits, please use "1758", "0178" or "0128"
• 5-digits, please use "11758", "10178" or "10128" (These codes usually work
with DIRECTV.)
Your new TV set is now ready
to automatically reproduce the best picture quality from the input
signal being fed into it. Enjoy yourVIZIO HDTV.
□pt"ionaL Component's
O
'JIZIO
CERTIFIED
These small arrows correspond to
the arrows shown in the above Steps.
They surround the MENU key.
Legend VMA31-45
ENHANCE YOURVIZIO EXPERIENCE
When it comes to components and accessories, don't settle for
less than VIZIO. We offer a full line of products specifically
designed to accentuate yourVIZIO HDTV. To learn more about
how you can enhance your VIZIO experience, call 888-849-4623
or visit www.VIZIO.com.
VIZIO HIGH-DEFINITION CERTIFIED CABLES
Our VIZIO Certified HD cables carry the same standards of
excellence as all our VIZIO products. Available in: DVI, HDMI
and Component in lengths of 2, 5, and 10 meters.
VIZIO CERTIFIED MOUNTS
FLUSH MOUNT- turn your HDTV into a work of art
TILT MOUNT- adjust your HDTV for the most comfortable
viewing position
ARTICULATING ARM- position your HDTV exactly where
you want it
I-