Kenwood JE270 - Manual (Page 4)

Use your new Kenwood Citrus
Juicer to squeeze the juice from
citrus fruit eg oranges, lemons, limes
and grapefruits.
safety
• Switch off and unplug:
o before fitting or removing parts
o after use
o before cleaning.
• Never let the power unit, cord or
plug get wet.
• Never use a damaged machine. Get
it checked or repaired: see ‘service’.
• Don’t let the cord touch hot surfaces
or hang down where a child could
grab it.
• Don’t let children or infirm people
use the machine unsupervised.
• Don’t let children play with the
machine.
• Only use the machine for its
intended domestic use.
important
• Don’t press too hard on the
cone or run for longer than 10
minutes - you may damage
your juicer.
before plugging in
Make sure your electricity supply is
the same as the one shown on the
underside of the machine.
important (UK) only
• The wires in the cord are coloured
as follows:
Blue = Neutral, Brown = Live.
• This machine complies with
European Economic Community
Directive 89/336/EEC.
before using for the first time
1 Remove all packaging and any
labels.
2 Wash the parts: see ‘cleaning’.
3 Wrap any excess cord around the
bracket on the underside of the
power unit O.
key
© dust cover
@ cone
@ strainer
© juice collector with pouring lip
© power unit
® cord wrap
to use your citrus juicer
1 Place the juice collector on to the
power unit O.
2 Put the strainer inside the juice
collector 0, then add the cone ©.
3 Cut the fruit in half. Then press each
half down on to the cone and the
juicer will operate automatically.
• During use the cone may change the
direction it rotates. This is normal
and ensures that the maximum
amount of juice is squeezed out of
the fruit.
• To help with juice extraction move
the fruit from side to side.
4 To stop the juicer lift the fruit from
the cone.
5 To pour the juice, remove the cone
and strainer from the juice collector
and pour using the pouring lip.
• When juicing large quantities, empty
the strainer regularly to prevent the
build up of pulp and seeds. Empty
the juice collector as required.
cleaning
• Always switch off, unplug and
dismantle before cleaning.
• Replace the dust cover after use.
power unit
• Wipe with a damp cloth, then dry.
other parts
• Wash in hot soapy water, then dry.
• Alternatively they can be washed on
the top rack of your dishwasher.
2