Uniden UH-057 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3.
Enter the Transmitter SELCALL ID using the Numeric
Keypad.
Example: 1 2 3 4 6
Everytime you press the numeric Keypad, conlirmation
tones will be heard. The SELCALL Tone assigned to the
pressed Keypad will be displayed on the LCD as shown:
(please see page 34 for the SELCALL TONE Key
Assignment)
CD
©
©
©
;ci,L:
!
=
'CAL‘
•
3
s
1
/
CAL:
-
H
CAL-
-
B
4.
Press the © Key to complete the programming.
Two beeps will be heard and the unit returns to its
previous status prior to accessing Programming Mode.
If you and your group are using the 6 Tone Format, simply
enter the sixth digit before pressing the<Of Key.
To remove the Transmitter SELCALL ID from memory:
1. Follow steps 1 and 2 of Transmitter SELCALL ID
programming.
2. Press the © Key.
Programming ends and no ID will be stored in the
memory. Whenever the Key is pressed, error tone
will be heard.
Page 29
UH-057