Connect Tech SSD/104 - Manual (Page 6)

Connect Tech SSD/104 SATA User Manual
Revision 0.00 6
Product Features
Specification Details
SSD Slots 2 x mSATA SSD slots (JEDEC MO-300B compatible)
Storage Capacities
Options 4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB (per mSATA slot)
** Or larger as new mSATA modules come to market
Flash Type Options SLC or MLC
Operating
Temperature Options Industrial (-40 to +85) or Commercial (0 to +70)
Power Requirement +3.3V / 0.5A max
Which can be sourced by PCIe/104 Bus, PCI-104 Bus or External Connector
Interface SATA Revision 2.6
SATA II 1.5Gbps / 3.0Gbps
Will work with any SBC SATA port
Performance
Numbers may vary
depending on mSATA
module used
Host Transfer Rate: 300MB/s
Sequential Read: Up to 270MB/s
Sequential Write: Up to 240MB/s
Random Read IOPS: Up to 35k
Random Write IOPS: Up to 30k
SSD/104 Carrier
Dimensions
(Overall Board Size) 3.550” x 3.775” (90.17mm x 95.89mm)
PC/104 Compliant
mSATA SSD Module
Dimensions 2.000” x 1.175” (50.80mm x 29.85mm)
JEDEC 300-MB Compliant
Mini PCIe Form Factor Compliant
Power Supply Voltage: +3.3V ±5%
Low Power Consumption: 260mA (Active) / 130 mA (Idle)
Power is sourced directly from the PCIe/104 bus, PCI-104 bus or the external power
connector
Connectors Standard Right Angle 7-pin SATA data connectors
mSATA Connectors
PCI-104 stacking connector (optional)
PCIe/104 stacking connectors (optional)
3.5mm pitch Phoenix Type power connector
Build Options PCI/104-Express Build – Both PCIe/104 and PCI-104 stacking connectors installed
PCIe/104 Build – Only the PCIe/104 stacking connector is installed
PCI-104 Build – Only the PCI-104 stacking connector is installed
No Bus Build – No stacking bus connectors installed
Cable-Free Operation
Option
(PCIe/104 Type 2) The SSD/104 SATA also has the option to take the SATA signals directly from any PCIe/104 or
PCI/104-Express Type 2 SBC, eliminating the need to use any SATA cables.
mSATA SSD ports Up to 2 mSATA SSD modules can be installed