System setup, Power restore, Auto power off – JVC DVB TU-HD500A User Manual
Page 30: Osd transparency, 3) system setup, 1 ^ 1 ьемеми$у$ 1 ш, Menu time out
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1^1ЬеМЕМи$у$1ш
3. System Setup
From here you can setup the System Value o1 FID STB, Also, you can restore the Factory
Reset value. The PIN Code is not changed even factory value restored.
Power Restore
This FID STB has the Power Restore function. If you setup the Power Restore On
and when AC Power is applied, the HD-STB will automatic turn on and display
final memorized channel. It is useful for multiple display or exhibition for control
the HD STB. After setup the Power Restore On, then just turn on the AC Power for
HD STB On and Turn Off the AC Power for HD STB Off.
The factory default value is Power Restore Off.
1) Press MENU button to display the menu.
Press LEFT or RIGHT to select SYSTEM SETUP menu
ENTER or DOWN to select the SYSTEM SETUP menu,
2) Press UP or DOWN to select the Power Restore menu.
Press ENTER or RIGHT to select the Power Restore.
3) Press UP or DOWN to select desired one.
4) Press EXIT to completion of Power Restore setting.
Q<ili ©
SYSTEM SETUP
a в“
Power
Restore
Off
Auto
Power
Off
Off
Menu
Time
Out
All
OSD Transparency 80 %
Display
Dimmer
Stepf
TV Remote CntT Code List
Factory Reset
Software Version:
1.3.
1.1
t> Off
On
PfMt ENTER « ^ t0 anttr Pnai A er ▼ ta nuv*.
Prwit EXIT I
d
Diltr P
t
«*
i
4 to fo bielt.
Auto Power Off
This HD-STB has the Auto Power Off function. You can setup the Auto Power Off
function on or off. After setup this function to on, if there is no aerial signal more
than 90 minutes, then HD-STB will automatic turn off for prevent unwanted
operation. If you setup to off, then this function is disable.
Menu Time Out
You can adjust OSD (On Screen Display) display time. If you feel display time is too
long or short, you can select time out period using Menu Time Out setup. If you set
to All, then the menu will not disappear automatically. At that time, you can press
EXIT to disappear the menu OSD.
OSD Transparency
You can adjust OSD (On Screen Display) transparency.
If you feel the menu display is too thick or thin, you can adjust the transparency of
OSD using OSD Transparency setup.
25