Important unpacking instructions, Notice, When removing blade – Cuisinart LPP User Manual

Page 2

Advertising
background image

2

IMPORTANT
UNPACKING
INSTRUCTIONS

This package contains a
Cuisinart

®

Pro Plus

Food

Processor and the standard
parts for it:

Metal chopping blade,
slicing disc, shredding disc,
ejector disc, adapter stem,
chute attachment, juicer
attachment, 3 juicing
cones, spatula, and recipe
and instruction book.

CAUTION: THE CUTTING
TOOLS HAVE VERY
SHARP EDGES.
To avoid
injury when unpacking the
parts, please follow these
instructions.

Place the box on a low
table or on the floor next to
the kitchen counter or table
where you intend to keep
the food processor. Be
sure the box is right side
up.

1. Remove the instruction

book and other printed
material.

2. You will see a corrugat-

ed insert containing the
cover with feed tube
and pusher, chute
attachment, juicer
attachment, juicing
cones and spatula.
Remove the cardboard
box using the finger
holes provided for easy
removal and place on
a table or other work-
space. Carefully open
and remove contents.

3. You will now see another

corrugated insert, which
contains the slicing and
shredding discs.

HANDLE DISCS WITH
GREAT CAUTION.
THEIR CUTTING
BLADES ARE RAZOR
SHARP.

Carefully open

and remove contents.
Grasp discs by the RIM
ONLY and carefully
place on work surface.

4. The motor base, work

bowl, blade assembly,
adapter stem and ejector
disc remain in the box.
Remove white ejector
disc, then remove
adapter stem from top of
work bowl.

5. The motor base and

work bowl with metal
blade are packed in a
foam block. The base,
work bowl and metal
blade are covered with a
polybag. Please note the
metal blade is loose in
the work bowl beneath
the polybag. Do not turn
over work bowl without
removing the polybag
and the metal blade.

6. Remove the base and

work bowl together by
grasping the plastic bowl
at the top with both
hands and lifting the
bowl straight up. Do not
rotate the bowl clockwise
on the base. This will
cause the bowl to
separate from the base.

7. Place the food processor

on a counter or table.
Remove the polybag.
Read the instructions
thoroughly before
assembling and using
the processor.

8. Save the shipping carton

and the foam and card-
board inserts. You may
want to use them at a
later date.

NOTE: Remember to
return your completed
warranty card with all
information carefully
filled out.

WHEN
REMOVING BLADE:

CAREFULLY REMOVE
THE METAL BLADE BY
GRASPING THE CENTER
HUB AND LIFTING IT
STRAIGHT UP. NEVER
TOUCH THE BLADES, AS
THEY ARE RAZOR
SHARP.

NOTICE

This appliance has a
polarized plug (one blade
is wider than the other).
As a safety feature, this
plug will fit only one way
in a polarized outlet. If the
plug does not fit fully in the
outlet, reverse the plug. If it
still does not fit, contact a
qualified electrician. Do
not attempt to defeat this
safety feature.

LPP Capacities:
The following can be prepared in a single batch using the 3-cup work bowl. Using the
chute attachment for slicing and shredding will allow you to do unlimited amounts.

Food

Amount

Sliced or shredded Cheeses, Fruits or Vegetables

3 cups using work bowl,
unlimited using chute attachment

Chopped Fruits and Vegetables

For best chopping results,
chop 1 cup at a time

Puréed Fruits and Vegetables, Cooked Legumes

3 cups thick purée

Chopped Raw or Cooked Meats, Poultry

up to 1/2 pound at a time

or Seafood

Thin Liquid

1-1/2 cups

Thick Liquid

2 cups

Bread/Pizza Dough (may use up to

1-1/2 cups flour in recipe yielding

3/4 cup whole grain flour in recipe)

a scant 1 pound of dough

Cake batter

3/4 pound to yield one 8-inch layer
or 6 cupcakes

Cookie dough

about 1 pound (12 – 24 cookies)

Cream for Whipping

1 cup to yield 1-1/4 cups
whipped cream

Nuts for Nut Butters

1-1/2 cups to yield
approximately 3/4 cups

1

02CU13467 LPP IB rev 3/4/04 6:30 PM Page 2

Advertising