RCA VR628HF - Manual (Page 18)

SETTING UP THE VCR
To Change the Signal Type
1. Press MENU-PROG to display the VCR MAIN MENU.
2. Press 4 to display the CHANNELS menu.
3. Press 3 to change the Signal Type between CABLE and
ANTENNA.
To Add or Remove Channels
You may want to add or remove channels after you Auto Channel
Search, especially if some of the channels have weak signals or
you don't want to watch them.
1. Press MENU-PROG to display the VCR MAIN MENU.
2. Press 4 to display the CHANNELS menu.
3. Press 2 to display the ADD/REMOVE CHANNELS screen. Use
CHANNEL up or down or number buttons to go to the
channels you want to remove or add.
ADD/RENOVE CHANNELS ADD/REMOVE CHANNELS
Channel 115 Channel 115
is presently ADDED is presently REMOVED
Press CLEAR to remove Press INFO to add
Press MENU to exit Press MENU to exit
TIME AND DATE
Before you set the time and date, set the Auto DST (Daylight­
Saving Time) feature to ON or OFF for your area.
Set Daylight-Saving Time
1. Press MENU-PROG to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
A Channels
5 Preferences
6 Audio
7 Language
0 Exit
Selecting Channels
The CHANNEL up and down buttons
access those channels active in your
VCR channel list.
You can still access channels not in
the channel list by using the number
buttons on the remote.
14