Recording from another vcr, Operating notes – RCA 390 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording from Another VCR
To copy (dub) tapes, connect the two VCR’s as shown
below. Use shielded audio/video cables (such as RCA
#AH002 or #AH005).
The connections from the recording VCR to your TV are
the ones you normally use. It is preferable to play the
original tape on the same machine that was used to record
it.
CAUTION: The unauthorized recording of television pro
grams and other materials may infringe the rights of
others.
Operating Notes
Adjust the TRACKING control (Step 12) if streaks appear
in the TV picture. This may happen if the cassette was not
originally recorded on the same VCR that you are using to
play it. After you adjust the tracking, stop both VCR's and
start over with Step 9.
.
RECORDING. SEE NOTES.
Use the PAUSE button (Step 13) for brief pauses. If you
want to pause for more than three or four minutes, stop
the VCR by pressing STOP. When you are ready to
resume, press both PLAT and RECORD.
20