Battery installation – RCA RP-1820 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BATTERY INSTALLATION
1. Push on Battery Door in the direction of the arrow, slide door down and
pivot upward.
2. Insert 2 “AA” size alkaline batteries (not included). Be sure the “ + ”. or
cap end, of each battery is installed as shown on the battery diagram.
3. Close the Battery Door.
IMPORTANT SAFETY INFORMATION: Always remove batteries if the unit is
not going to be used for a month or more. Batteries left in the unit may leak
and cause damage. Always adhere to the following precautions:
A. Any battery may leak If mixed with a different battery type, inserted
incorrectly, or if all batteries are not replaced at the same time.
B. Any battery may leak or explode If disposed of in fire or if an attempt
is made to charge a battery not intended to be recharged.
C. Discard leaky batteries immediately. Leaking batteries can cause skin
burns or other personal injury.
When discarding batteries, be sure to dispose of them in the proper manner,
according to your state and local regulations.
Always return tape operation buttons to their off position before storing. This will
relieve pressure on certain parts in the tape player that might deform after long
periods of time.