Other features, Reception, Tape playback – RCA VR634HF User Manual
Page 53
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OTHER FEATURES
A U D I O
1
R e c e p t i o n :
S T E R E O
2 T a p e P l a y b a c k :
H I - F I
Q E x i t
Now you are ready to select an item from the menu to set up.
RECEPTION
Some TV programs are broadcast with stereo audio or a
Second Audio Program (SAP) which offers a second language.
The reception feature lets you select the type of audio you want
to record. Press 1 to switch between Reception: STEREO, MONO,
and SAP.
•
Select STEREO for normal or stereo broadcast TV recording.
•
Select MONO if the stereo signal is weak and the sound is too
noisy.
•
Select SAP to record a Second Audio Program instead of
normal audio on both the Hi-Fi and linear tracks.
TAPE PLAYBACK
The VCR records the same audio on both Hi-Fi and linear tracks
on the tape. Hi-Fi sound is recorded on a separate left and right
stereo channels. Monaural sound is recorded on the linear track.
Press 2 to switch between tape playback: HI-FI, LINEAR, and MIX.
To enjoy Hi-Fi sound, connect your VCR to a stereo television or
amplifier/receiver using the AUDIOA/IDEO jacks. The Tape
Playback feature lets you select which audio you use during
playback.
•
•
Select HI-FI to play back sound recorded on the Hi-Fi track
and for normal use.
•
Select LINEAR to play back sound recorded on a linear
monaural track, such as a Second Audio Program (SAP),
or a dubbed voice.
•
Select MIX to play back the sound recorded on both the
linear and Hi-Fi tracks, sound-on-sound.
To receive Hi-Fi stereo sound, use
audio-video cables with a compatible
TV or receiver. Using only the RF OUT
jack will not produce stereo sound.
51