Section 12, Troubleshooting procedures – Toshiba VT130G1 User Manual
Page 81
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Section 12
TROUBLESHOOTING PROCEDURES
Improper adjustment, wiring, or inverter malfunction can cause the fault relay to latch.
To reset a fault, the reset button must be pressed or reset by remote signal.
Figure 12-1 is a trouble shooting flow chart in the event the motor does not run. Table 10
shows some trouble indications and causes.
WARNING
When troubleshooting with power on, care must be taken to avoid elec
tric shock. Grounded test equipment may damage Inverter. D.C. BUS
voltage remains charged for several minutes after power is removed.
FIGURE 12-1 Troubleshooting Flow Chart When Motor Does Not Run
55
Advertising