Front panel, Usincthe remote, Usincthe remote to control a device – RCA CRT Television User Manual

Page 27: Modes of operation

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

USINCTHE REMOTE

3. Press and hold the button on the remote you want to program.

4.

Enter the code from the code list.

5.

Release button, and then press ON*OFF to see if the component

responds to the remote commands, if it doesn't, try pressing the

component button and then ON»OFF again.

6.

if you get no response, repeat these steps using the next code listed

for your brand, until the component responds to the remote
commands.

USINCTHE REMOTE TO CONTROL A DEVICE

Once the remote has been programmed successfully, you are ready to
use it to control your devices.

To operate the device:

1. Press the device button (TV, VCR1, VCR2, DVD, AUX, or SAT»CABLE)

to set the remote to control the device.

2.

Press ON»OFF to turn the device ON or OFF.

3. Use the remote buttons that apply to that device.

MODES OF OPERATION

Because this universal remote can control several different components
(DVD player, VCR, Cable Box, etc.) it uses operational modes triggered
by the component buttons. For example, if you want the remote to

control the TV, you would press the TV button to put the remote into TV

mode before you could control the TV.

FRONT PANEL

if you cannot locate your remote you can use the front panel of your TV

to operate many of the TV's features.

MENU Brings up the Main menu. When in the menu system. It selects
highlighted items. Also returns you to the previous menu.

CH V Scans down through the current channel list. In the menu system.

It points down to items and adjusts menu controls.

CH * Scans up through the channel list, in the menu system, it points

up to items and adjusts menu controls.

VOL - Decreases the volume. When in the menu system, VOL - is used
to point left to items and adjust menu controls.

VOL + increases the volume. When in the menu system, VOL + is used
to point right to items and adjust menu controls.

POWER Turns the TV on and off.

MENU CHV CH.^ VOL-

VOL + POWER

oooooo

The front panel above shows a typical

button layout. The exact look of the
buttons may be different from those on
the front of your TV

The Front Panel Block feature disables all

front panel buttons if Parental Controls
are locked. For more information, see
Parental Control, in the

Features and

Controls

section.

25

Advertising