Attach the strap, Power supply – RCA CDS 1000 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Attach the Strap

Dropping a camera can cause serious damage both

internally and externally. So, to secure your investment,
attach the hand strap first thing, and use it every time.

1. Insert the small loop at the end of the strap under the

strap eyelet.

2. Insert the other end of the strap through the loop to tie

the strap onto the strap eyelet.

Power Supply

This digital camera features two ways to supply
power to it; either use two batteries (size AA) or the

included AC adapter.

Inserting Batteries

1. On the bottom of the camera, slide the battery

chamber cover out in the direction of the large
arrow to open it. A click can be heard when the
compartment is released.

2. Insert two (2) AA batteries. Make sure to match the

positive and negative ends of the batteries to the
markings inside the battery compartment.

3. Close the battery chamber cover by pushing down

firmly and sliding it back until the latch closes with a
click.

The battery compartment

Important Notes!

• Never use manganese batteries.

• Your camera will not work if the batteries are inserted incorrectly.

• Remove batteries from camera if it will not be used for an extended

period of time.

• Never mix old batteries with new ones.

• Never mix batteries of different types.

• Never destroy batteries or dispose of by fire. Doing so can cause an

explosion or leak caustic materials into the environment.

Advertising