Alternate remote control units, Bsboiiri □ ® n, Rcil – RCA VPT 385 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Alternate Remote Control Units
Selected
models
of
RCA
color
TV
receivers
and
monitor/receivers
feature
infrared
hand
units
that
will
also
remotely
control
your
VCR.
Only
the
buttons
that
are
used
for
controlling
your
VCR
are
described
here.
These
buttons
have
generally
the
same
functions
as
the
ones
with
the
same
names
on
the
front
panel
of
the
VCR, but there are some differences,
•
Any
VCR
tuner
channel
may
be
selected
by
pressing
two of the Digit buttons on the hand unit. Press 0 first
to select tuner channels 1 through 9.
Separate buttons turn the VCR on and off.
Simply
press
the
Record
button
to
record.
It
is
not
necessary to press the Play button at the same time.
Note: When you use
CHANNEL UP
or
DOWN
on the
Digital
Command
Center
hand
unit,
the
VCR
uses
its
internal scan list of channels, not the scan list that you
programmed into the hand unit for controlling the TV.
PrMt this button to turn on VCR and
put remote In "VCR Mode”. Other
buttons on remote will not control the
VCR until this button Is pressed.
Press to record.
Press to play forward
Press to rewind
when VCR is stopped
or reverse scan when in Play.
Press for fast forward
when VCR is stopped
or forward scan when in Play.
Same as “SLOW" on the VCR's
hand unit.
Press to search backward
when VCR is playing.
Same as VCR's remote.
Press to search forward
when VCR is playing.
D
igital
command
centeg
RCil
H I
[*«»»«| I
I TAn I [
CD
j
WtOOWAM I--------
pi;:
m
:Pt ip;;;[*]■
S .
t
IIIS.
[S
□ BSBoiiri □ ® n
Two buttons select any channel.
Same as "Stop" on front panel.
Same as "Pause” on front panel.
Same as "F. ADV" on the VCR's
hand unit.
Select next higher or lower
channel In VCR's scan list.
Turns power off.
Press to switch antenna between
TV and VCR. {Same as
TV/VCR Switch on VCR)
Same as SLOW TRACKING AT on hand unit.
Press this button to turn on VCR and
put remote In “VCR Mode". Other
buttons on remote will not control the
VCR until this button Is pressed.
Two buttons select
any channel.
Same as "Pause"
on front panel.
Press to record.
Press to search backward
when VCR is playing.
Same as VCR’s remote.
Press to rewind
when VCR is stopped.
Press to reverse search
if VCR is playing.
no/i
Turns off power.
Select next higher or lower channel
in VCR’s scan list.
Same as "Stop” on front panel.
Press to play.
Press to search forward when VCR
is playing.
Press for fast forward when VCR
is stopped. Press for forward search
when VCR is playing.
Press to switch antenna between
TV and VCR.
27