Toshiba EX100 - Manual (Page 7)

I/O Modules
Type Part number Circuit Specifications
DC/ACinput LXU)“>MDI3l 16(16/common) 12-24 Vdc/ac,8mA
DC input EX10*MDI32 32 (8/common) 24 Vdc. 5 mA
AC input EX10>fMIN51 16(16/common) iO(l-12t)Vac,7mA
LXKKMINril 16(16/a)mmon) 2(m-240Vac,6mA
Relay output BXl()*MROhl 12 (4/common) 24() Vac/24 Vdc. 2 A/point
EXHHMR062 8 (isolated) 24t) Vac/24 Vdc, 2 A/point
lYansistor output EXI()‘<-MD031 16 {l6/common) 3-24 Vdc. 1 A/point
EXl0*MDO32 32 {8/conimon) 5-24 Vdc, 0.1 A/point
Trine output EXU1*MAC61 12 (4/common) 100-24(1 Vac, 0.5 A/point
Analog input EX10*MAI21 4 channels 4-20 mA/1-5 V (K-hit)
EX10*MAI3I 4 channels 0-10 V(8-hit)
KX10*MAI22 4 channels 4-20 mA/1-5 V(12-bii)
EX1(I^^MAI32 4 channels -10--I-10 V{ 12-bit)
Analog output EX 10=fMAO31 2 channels 4-20 mA/1 -5 V/0-10 V (8-bit)
EX10i=MAO22 2 channels 4-20 mA/1-5 V(12-bit)
EXKEMA032 2 channels -10-+I0 V(12-bit)
Pulse input EXlUfMPI2l 1 channel 5/12 V, lOOkpps
Motion control EXIO^MMCI 1 1 axis 200 kpps, 64 points data
ASCII/BASIC T.B.A.
H EPROM T.B.A.
Instructions
Type Function
Ladder NO-contacl. NC-contact, coil, transitional contact, master control,
jump control, timers (on-delay/off-delay, single-shot), counter
Data manipulation Data move, data table block move, register to table, table to register
Arithmetic Addition, subtraction, multiplication, division
{register/conslunl, single/double-length)
Compare < (register/constanl)
Logical operation AND, OR, exclusive OR, NO V, two's complement, rotate
Data conversion Binary/BCD. bit count, eneode/decode
Special functions Upper/lowcr limit, maximum, minimum, mean value, function
generator, square root, sine, arc sine, cosine, arc cosine, bit set/reset,
diagnostic message, immediate IN/OUT, step sequencer, tlip-tlop,
iip/down counter, shift register, data read/write for special module'",
EEPROM read/wrile*. clock-calendar data setting*
' murked items require CPU V2.1 orufler