Remote keyless entry, To unlock the doors, Automatic unlock on exit (only available if – Chrysler 2004 Concorde User Manual

Page 18: Automatic door locks enabled)

Advertising
background image

Automatic Unlock on Exit (Only Available if
Automatic Door Locks Enabled)

This feature will unlock all the doors when the driver’s
door is opened and the ignition switch is in the LOCK
position. This function is disabled as delivered from the
factory. Automatic Unlock on Exit can be enabled or
disabled by performing the following procedure:

1. Close all doors and place the key in the ignition.

2. Cycle the ignition switch between ON/RUN and OFF
4 times ending up in the OFF position.

3. Press upward on the power door unlock switch to
unlock the doors.

4. A single chime will indicate the completion of the
programming.

REMOTE KEYLESS ENTRY

This system allows you to lock or unlock the doors and
unlock the trunk from distances up to 40 feet (12 meters)
using a transmitter. You don’t have to point the transmit-
ter at the vehicle to activate the system.

To unlock the doors:

Press and release the unlock button on the transmitter.

NOTE:

The system may be programmed to unlock all

the doors upon the first press of the Unlock button. To
toggle between the first press unlock of driver’s door to
unlock of all doors, perform the following procedure:

18

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising