Trip functions – Chrysler 2008 300 SRT User Manual

Page 214

Advertising
background image

• Door(s) Ajar (with a single chime if vehicle is in

motion)

• Trunk Ajar (with a single chime)
• Low Washer Fluid (with a single chime)
• Oil Pressure
• ACC Off — When the Adaptive Cruise Control (ACC)

system is turned off. Refer to “Adaptive Cruise Con-
trol (ACC)” in Section 3 (if so equipped).

• ACC Ready — When the Adaptive Cruise Control

(ACC) system is activated. Refer to “Adaptive Cruise
Control (ACC)” in Section 3 (if so equipped).

• ACC Set — After setting the desired speed in the

Adaptive Cruise Control (ACC) system. Refer to
“Adaptive Cruise Control (ACC)” in Section 3 (if so
equipped).

• Driver Override — If you apply the accelerator after

setting the desired speed in the Adaptive Cruise
Control (ACC) system. Refer to “Adaptive Cruise
Control (ACC)” in Section 3 (if so equipped).

• Distance Set — After changing the desired following

distance in the Adaptive Cruise Control (ACC) system,
this message will display momentarily. Refer to
“Adaptive Cruise Control (ACC)” in Section 3 (if so
equipped).

• Attention — If the Adaptive Cruise Control (ACC)

system predicts that its maximum braking level is not
sufficient to maintain the set distance, this message
will flash and a chime will sound while ACC continues
to apply its maximum braking capacity. When this
occurs, you should immediately apply the brakes as
needed to maintain a safe distance from the vehicle
ahead. Refer to “Adaptive Cruise Control (ACC)” in
Section 3 (if so equipped).

212

UNDERSTANDING YOUR INSTRUMENT PANEL

Advertising
This manual is related to the following products: