Chrysler 2009 Sebring Convertible - Owner Manual - Manual (Page 95)

7. Align the pins at the front of the large frame with the
hole in each trim panel. Slide the pins outward until fully
extended into each hole. Removing and Storing the Wind Stop
Reverse the installation procedure to remove, fold, and
store the Wind Stop. However, note the following before
doing so:
• Disengage the pivot lock (1) to fold the small frame flat
onto the large frame. Disengage the frame lock (2) to
disconnect the small frame from the large frame.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93
3