Cleaning the instrument panel cupholders, Fuses, Totally integrated power module (tipm) – Chrysler 2009 Country - Owner Manual User Manual

Page 475

Advertising
background image

Seat Belt Maintenance
Do not bleach, dye or clean the seat belts with chemical
solvents or abrasive cleaners. This will weaken the fabric.
Sun damage can also weaken the fabric.

If the seat belts need cleaning, use a mild soap solution or
lukewarm water. Do not remove the belts from the car to
wash them.

Replace the seat belts if they appear frayed or worn, or if
the buckles do not work properly.

Cleaning the Instrument Panel Cupholders

Removal
Pull the flexible liner from the cupholder drawer starting
at one edge to ease removal.

Cleaning
The liner is top shelf dishwasher safe, or you may follow
the cleaning procedure below.

Soak the liner in a mixture of medium hot tap water and
one teaspoon of mild liquid dish soap. Let soak for
approximately 30 minutes. After 30 minutes, pull the
liner from the water and dip it back into the water about
six times. This will loosen any remaining debris. Rinse
the liner thoroughly under warm running water. Shake
the excess water from the liner and dry the outer surfaces
with a clean soft cloth.

Installation
Place the liner into the cupholder drawer and press the
liner into place so that the retention tabs seat into the
corresponding openings in the drawer.

FUSES

Totally Integrated Power Module (TIPM)

The Totally Integrated Power Module (TIPM) is located
in the engine compartment near the battery. Refer to the
applicable “Engine Compartment” illustration in this

7

MAINTAINING YOUR VEHICLE

473

Advertising
This manual is related to the following products: