Theft alarm, To arm, To disarm – Chrysler 2010 300 SRT - User Guide User Manual

Page 14: Seat belt, Child restraints, Getting started

Advertising
background image

THEFT ALARM

To Arm

Equipped with Keyless Go: Press the Keyless Go Start/Stop button until the

Electronic Vehicle Information Center (EVIC) indicates that the vehicle ignition is
“OFF,” then press the Key Fob LOCK button or the power door lock switch while the
door is open.

Not equipped with Keyless Go: Press the Key Fob LOCK button or the power door

lock switch while the door is open.

To Disarm

Equipped with Keyless Go: Press the Key Fob UNLOCK button and press the

Keyless Go Start/Stop button (requires at least one valid Key Fob in the vehicle).

Not equipped with Keyless Go: Press the Key Fob UNLOCK button and turn the

ignition to the ON position.

SEAT BELT

• Be sure everyone in your vehicle is in a seat and using a seat belt properly.

WARNING!

In a collision, you and your passengers can suffer much greater injuries if you are
not properly buckled up. You can strike the interior of your vehicle or other
passengers, or you can be thrown out of the vehicle. Always be sure you and
others in your vehicle are buckled up properly.

CHILD RESTRAINTS

• Children 12 years and under should ride properly buckled up in a rear seat, if

available. According to crash statistics, children are safer when properly restrained
in the rear seats rather than in the front.

• Every state in the United States and all Canadian provinces require that small

children ride in proper restraint systems. This is the law, and you can be prosecuted
for ignoring it.

GETTING STARTED

12

Advertising
This manual is related to the following products: