License lamp – Chrysler 2010 300 SRT - Owner Manual User Manual
Page 411
Advertising
9. Disconnect the bulb from the socket assembly and
install the replacement bulb.
10. Reinstall the bulb and socket assembly into the tail
lamp assembly, and then turn it clockwise.
11. Reinstall the tail lamp assembly, fasteners, electrical
connector, and trunk liner.
12. Close the trunk.
License Lamp
1. Remove the screws securing the lamp to the rear
fascia.
4 — Backup Lamp Bulb
410
MAINTAINING YOUR VEHICLE
Advertising
This manual is related to the following products: